Cisco Headend System Release 2.7 Installation Guide
Chapter 16 Convert Binary IPPV Purchase Reports Into Text Format with the parseIppvRept Utility
178
740020 Rev H
Run the parseIppvRept Utility
Introduction
The following information provides instructions to run the parseIppvRept utility.
Running the parseIppvRept Utility
Follow these instructions to run the parseIppvRept utility.
Note: This procedure uses two examples: one showing comma-delimited output,
and the other showing output in block-type format. Both examples direct output to a
file for later examination.
1 If necessary, open an xterm window on the DNCS.
2 Type ls -tla /dvs/ftp/purchaseReportArchive and then press Enter. The system
and the other showing output in block-type format. Both examples direct output to a
file for later examination.
1 If necessary, open an xterm window on the DNCS.
2 Type ls -tla /dvs/ftp/purchaseReportArchive and then press Enter. The system
lists the contents of the /dvs/ftp/purchaseReportArchive directory, newest files
first.
first.
3 Decide which IPPV purchase report you want to convert to text format.
Note: The most recent files are listed first.
4 Choose one of the following options:
To convert an IPPV purchase report with comma delimited output, go to step
5.
5.
To convert an IPPV purchase report with block-type output, go to step 7.