Cisco Headend System Release 2.7 Installation Guide
Install the Alarm Manager Client Software
78-745262-01Rev C
59
11 Review the data on the Pre-Installation Summary window and then click Install.
The Alarm Manager banner appears with an Installing … message as the Alarm
Manager client software installs.
Note: Click Previous if you want to change your installation folder or your
Note: Click Previous if you want to change your installation folder or your
shortcut folder.
Important: If your system does not have enough disk space, an error message
Important: If your system does not have enough disk space, an error message
may appear. If an error message appears, consider these options:
Remove obsolete or unneeded files from your current folder or hard drive to
obtain more disk space.
Select a folder or a hard drive with more disk space.
Call Cisco Services for advice.
12 Click Done when the Install Complete window opens. The Alarm Manager client
software finishes installing.
13 Eject the Alarm Manager CD from your PC.
14 Did the Alarm Manager client software install without errors?
14 Did the Alarm Manager client software install without errors?
Note: If the Alarm Manager client software encountered errors while installing,
the Install Complete window will indicate that errors were encountered during
installation and will advise you to examine the Alarm Manager client logfile.
If yes, go to step 15.
If no, use a Windows text editor to examine the Alarm Manager client logfile.
Notes:
Notes:
–
The Alarm Manager client logfile resides in the same directory into which
you installed the Alarm Manager client software.
–
The Alarm Manager client logfile is called DBDS_EMS_InstallLog.log.
–
Call Cisco Services if you need help troubleshooting any Alarm Manager
client installation errors.
–
Go to step 15 after resolving all error conditions.