Cisco Headend System Release 2.7 Installation Guide
Run the preUpgradeChecks Script on the DNCS and RNCS to Migrate to an Integrated Application Server
4035749 Rev B
37
Run the preUpgradeChecks Script on the DNCS
and RNCS to Migrate to an Integrated Application
Server
CAUTION:
If your system currently has a V245 or V240 Application Server and you
intend to continue operating a standalone Application Server, STOP. You
should be following the instructions in DVD Upgrade Installation Guide for
System Release 5.0 with Standalone Application Server (part number 4042225).
If your system currently has a V245 or V240 Application Server and you
intend to continue operating a standalone Application Server, STOP. You
should be following the instructions in DVD Upgrade Installation Guide for
System Release 5.0 with Standalone Application Server (part number 4042225).
Important: The Sun Blade150 and Ultra 5 Application Servers are not supported in an SR 5.0
environment. The following section provides the procedure and sample output when
executing the preUpgradeChecks script on the DNCS with either of these Application
Servers.
environment. The following section provides the procedure and sample output when
executing the preUpgradeChecks script on the DNCS with either of these Application
Servers.
You have two choices. You can migrate to an integrated Application Server, or you
must replace the Application Server with a supported platform (Sun Fire V240 or
V245). The preUpgradeChecks scripts will complete with ERRORS if you answer
“no” to the migration questions. This will cause the doLiveUpgrade script to fail.
You will not be able to upgrade the system until the Application Server is replaced
or you elect to migrate to an integrated Application Server.
This section describes how to run an automated system check to determine if your
system is acceptable for an SR 5.0 upgrade. If it is, you can continue with the
upgrade; if it is not, you must correct any errors that are found and then rerun this
procedure.
1
must replace the Application Server with a supported platform (Sun Fire V240 or
V245). The preUpgradeChecks scripts will complete with ERRORS if you answer
“no” to the migration questions. This will cause the doLiveUpgrade script to fail.
You will not be able to upgrade the system until the Application Server is replaced
or you elect to migrate to an integrated Application Server.
This section describes how to run an automated system check to determine if your
system is acceptable for an SR 5.0 upgrade. If it is, you can continue with the
upgrade; if it is not, you must correct any errors that are found and then rerun this
procedure.
1
From the root xterm window, type the following command and press Enter.
/cdrom/cdrom/sai/scripts/preUpgradeChecks -I
Note: The -I is an uppercase i.
Result: The Do you wish to continue? message appears.
Result: The Do you wish to continue? message appears.