Cisco Headend System Release 2.7 Installation Guide
Chapter 5 SR 5.0 Post Upgrade Procedures
82
4035749 Rev B
Restarting the Application Server
This section provides procedures for starting the Application Server processes on a
DNCS that was migrated to use an integrated Application Server.
1 From the dncs xterm window on the DNCS, type the following command and
DNCS that was migrated to use an integrated Application Server.
1 From the dncs xterm window on the DNCS, type the following command and
press Enter to start the Application Server processes.
appStart
2
Type the following command and press Enter. The appControl window opens.
appControl
3 Select option 2 (Startup/Shutdown Single Group or Process) and press Enter.
The APPSERVER Control Menu appears.
4 Select option 1 (appserv) and press Enter.
5 Select option e and press Enter to display the application groups and view
5 Select option e and press Enter to display the application groups and view
whether the applications are running.
6 When the appControl window indicates that the current state (Present State) of
each process is running, follow the on-screen instructions to close the
Applications Control window.
Applications Control window.
7 To see Application Server processes start and to monitor their progress, complete
these steps.
a From the Digital Network Control System window, click Process Status.
b Click Show from the AppServer row. The AppServer Process Status window
a From the Digital Network Control System window, click Process Status.
b Click Show from the AppServer row. The AppServer Process Status window
appears.
Restarting the Application Server at Rovi Corporation Sites
If necessary, refer to the documents supplied by Rovi to restart the Rovi server.