Cisco Headend Digital Broadband Delivery System Maintenance Manual
Configuring and Verifying the MMMRemote Server Entry in the VASP List
4004455 Rev G
35
Configuring and Verifying the MMMRemote Server
Entry in the VASP List
The MMMRemote Server relays the EAS messages to the remote RNCS (LIONN)
servers in your network.
servers in your network.
Note: Follow these procedures ONLY if your system uses our RCS solution. If your
system does NOT use the RCS solution, continue to Configuring the EAS on the
DNCS for System Releases Prior to SR 5.0 (see "Configuring the EAS on the DNCS
for System Release 5.0" on page 39).
system does NOT use the RCS solution, continue to Configuring the EAS on the
DNCS for System Releases Prior to SR 5.0 (see "Configuring the EAS on the DNCS
for System Release 5.0" on page 39).
For further instructions on setting up the RNCS for EAS, see Distributed EAS on the
Regional Control System, Configuration and Troubleshooting Guide (part number
4002342).
Regional Control System, Configuration and Troubleshooting Guide (part number
4002342).
Viewing the VASP List for the MMMRemote Server
1 From the DNCS Administrative Console, click the Network Element
Provisioning tab.
2 Click VASP. The VASP List window opens.
3 Is there an MMMRemote Server entry in the VASP List for each remote RNCS
(LIONN) server in your network?
If yes, go to Verifying the MMM Server Entry in the VASP List (on page 37)
If no, go to Configuring the MMM Server Entry in the VASP List (on page 36)