Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations Installation Guide

2-12

Installation

78-715193-01 Rev C

Installing Sub-Modules in the Processor

Installing the Sub-Module

Important: For best results, install the Prisma II bdr Receive Processor into the

Prisma II Chassis before installing the receiver sub-modules into the processor. To

install the sub-module in the processor, follow these steps.

Align the ridges on the top and bottom of the receiver sub-module with the

guide slots located on the processor.

Gently slide the sub-module into the receive processor until you feel the

power and communications connections on the back of the module join

connectors on the processor. Use the thumbscrew on the top of the sub-

module to lock the sub-module in place.

Repeat steps 1 and 2 for each receiver sub-module.

This completes installation of the Prisma II bdr Receive Processor and the

Prisma II bdr Optical Receiver sub-module(s).