Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations Installation Guide
3-20
Operation Using the ICIM
78-715193-01 Rev C
Configuring the Prisma II bdr Receive Processor Using the ICIM,
Continued
Configurable Parameters
Configurable parameters for this module include the following.
Parameter Function
Values
Default
RednMode Redundancy Mode.
Yes or No
Yes
RFA_Attn
RFB_Attn
RFB_Attn
Attenuates the RF output channels A
and B.
0 dB to 10 dB 0 dB
Ext_Redn
External Redundancy Mode. If Yes the
unit acts as a backup unit to another
unit until an external line indicates the
other unit has failed.
Yes or No
No
Switch
Determines how the channels are
switched. Deflt_1 and Deflt_2 will
select which is the default receiver.
Force_1 and Force_2 will force switch
to either receiver 1 or receiver 2,
regardless of any errors.
Deflt_1
Deflt_2
Force_1
Force_2
Deflt_2
Force_1
Force_2
Deflt_1
RF_Out_A
RF_Out_B
RF_Out_B
Controls the muting of RF channels A
and B. If Auto, the CCB determines if
the output should be muted (only if in
full redundancy mode). If On, the
output is not muted. If Off, the output
is muted.
Auto, On, Off Auto