Cisco Cisco GS7000 4-Port 1GHZ Node Technical References
Model GS7000 GainMaker Node RF
Cable Technical Bulletin
Cable Technical Bulletin
Overview
Introduction
A small percentage of Model GS7000 GainMaker
®
Nodes that were manufactured
and shipped prior to May 2008 may exhibit an intermittent "no RF" or "low RF"
condition in the forward or reverse path. This condition can be caused by
forward or reverse RF cables that have intermittent continuity.
Purpose
This document explains to customers using the Model GS7000 Node how to check
and replace these cables, if necessary.
Audience
This document is intended for authorized service personnel who have experience
working with similar equipment. The service personnel should have appropriate
background and knowledge to complete the procedures described in this
document.
Qualified Personnel
Only appropriately qualified and skilled service personnel should attempt to
install, operate, maintain, and service this product.
WARNING:
Allow only qualified and skilled personnel to install, operate, maintain, and
Allow only qualified and skilled personnel to install, operate, maintain, and
service this product. Otherwise, personal injury or equipment damage may
occur.
Related Publications
You may find the following publications useful as you implement the procedures
in this document.
Model GS7000 GainMaker Scaleable 4-Port Node Installation and Operation Guide,
part number 4013584