Cisco Headend System Release 2.7 Installation Guide

 

110 

4042225 Rev A 

In this procedure, you will check to ensure that all third-party BFS application 
cabinet data is present following the upgrade. 
Note:  You will need the sheet of paper that you used to record third-party BFS 
application cabinet data when you completed Record Third-Party BFS Application 
Cabinet Data. (on page 23) 
1 

From the DNCS Administrative Console, click the Application Interface 
Modules tab. 

Click BFS Client. The Broadcast File Server List window opens. 

3  Refer to the sheet of paper that you used when you completed Record Third-

Party BFS Application Cabinet Data (on page 23). Are there any third-party BFS 
application cabinets that were present before the upgrade and are now missing 
after the upgrade? 



 

If yes, create a cabinet for each of the missing third-party applications using 
the Broadcast File Server List window that is already open. 
a  Click New Server. The Set Up Server window opens. 
b  Click the arrow next to the Server Name field and select the appropriate 

server. 

c  Click to highlight the correct Mode (1-way or 2-way). 
d  Click to highlight the appropriate Available Source. Then click Add to 

move it to the Selected Sources column. 

e  Click Save. 
f  Repeat steps a through e for any additional third-party BFS application 

cabinets that are missing. 



 

If no (there are no missing third-party BFS application cabinets), continue 
with step 4. 

4  Highlight each of the third-party application cabinets listed on the sheet of 

paper, in turn, and then click Edit. The Set Up Server window opens for the 
selected cabinet. 

5  Examine the Mode field for the selected cabinet and verify that the correct mode 

(1-way or 2-way) is checked. 

6  Verify that the correct Selected Sources are present for the selected cabinet. 
7 

Click Cancel to close the Broadcast File Server List window when you are 
finished.