Cisco Headend System Release 2.7 Installation Guide
Add DTACS as a Trusted Host on the DNCS Server
4042225 Rev A
135
Add DTACS as a Trusted Host on the DNCS Server
Important: All steps in this procedure take place in the root xterm window on the
DNCS server.
1 In the root xterm window on the DNCS server, verify the name of the DTACS
DNCS server.
1 In the root xterm window on the DNCS server, verify the name of the DTACS
server by typing the following command and pressing Enter.
grep [dtacsIP] /etc/hosts
2
Locate the dtacs entry and record the first entry that follows the IP address for
DTACS in the space provided.
Host Name of DTACS Server: __________
Example: In the following example, the output shows that the hostname of the
DTACS server is dtacshost.
DTACS in the space provided.
Host Name of DTACS Server: __________
Example: In the following example, the output shows that the hostname of the
DTACS server is dtacshost.
# grep 10.253.0.2 /etc/hosts
10.253.0.2 dtacshost dtacs
Notes:
The first name listed after the IP address is the hostname of the DTACS
server; the other names are aliases
server; the other names are aliases
This is only an example. The IP address and entries for dtacs may differ in
your /etc/hosts file.
your /etc/hosts file.
3 Add the following entries into the hosts.equiv file, where [dtacshost] is the entry
you recorded in step 2.
[dtacshost] dtacs
[dtacshost] dncs
[dtacshost] root
Important: Substitute the hostname you recorded in step 2 for [dtacshost]. Do
not include the brackets.
not include the brackets.
4 Save and close the file.