Cisco Headend System Release 2.7 Installation Guide

 

22 

4042225 Rev A 

The number of BFS sessions post-upgrade needs to equal the number of pre-upgrade 
sessions. Use this procedure to determine and record the number of pre-upgrade 
BFS sessions. Then, after the upgrade, you will determine the number of 
post-upgrade BFS sessions. 
Follow this procedure to check and record the number of pre-upgrade BFS sessions. 
1  Press the Options button on the front panel of the BFS QAM until the Session 

Count total appears. 

Record the Session Count total in the space provided.   __________   

3  Does the system you are upgrading use the ASI card? 



 

If yes, from the dncs xterm window, type the following command and press 
Enter. 

Example: Output from the command should look similar to the following: 

 



 

If no, go to the next procedure in this chapter. 

4  Do the number of Active Streams match the number of sessions built on the BFS 

QAM? 



 

If yes, go to the next procedure in this chapter. 



 

If no, call Cisco Services and inform them about the discrepancy.