Cisco Headend System Release 2.7 Installation Guide
Stop System Components
4042225 Rev A
51
6 Are there any entries in the PAT Configuration table?
If yes, continue with step 7.
If no, skip to step 11.
7 Select the first entry in the BIG PAT window and click Delete Entry. A
confirmation window appears.
8 Click Yes to confirm the deletion of this entry. An Information message appears
and informs you that all BFS sessions must be torn down and rebuilt for the
deletion to take effect.
Notes:
deletion to take effect.
Notes:
The Information message only appears for the first entry you delete.
Although you must respond to this question, you do not need to tear down
and rebuild these sessions because you will delete the BIG later in this
procedure.
and rebuild these sessions because you will delete the BIG later in this
procedure.
9
Click OK.
10 Repeat steps 6-8 until you have deleted every entry in the BIG PAT window and
then go to step 11.
11 From the BIG PAT window, click Close.
12 From the Set Up BIG window, click Apply and then click Save.
13 From the BIG List window, select the BIG and then click File and select Delete.
12 From the Set Up BIG window, click Apply and then click Save.
13 From the BIG List window, select the BIG and then click File and select Delete.
A confirmation window appears.
14 Click Yes to confirm the deletion of the BIG.
15 Close the BIG List window.
15 Close the BIG List window.
Stopping the System Components
Follow these instructions to stop the system components.
1 In the Application Server xterm window, type exit and press Enter to switch to
1 In the Application Server xterm window, type exit and press Enter to switch to
the dncs user.
2 Complete the following steps to stop the processes on the Application Server.
a
Type the following command and press Enter. The Application Server
processes stop.
processes stop.
appStop
b Type the following command and press Enter. The initd process on the
Application Server is shut down.
appKill
c Type the following command and press Enter to determine if the processes
have stopped. The processes are stopped when there are no processes listed
in the output.
in the output.
pgrep -fl dvs
d Change to root user on the Application Server and type the following
command and press Enter to disable cron jobs.
svcadm –v disable –s cron