Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations Installation Guide
78-715192-01 Rev C
Operation Using the ICIM
3-1
Chapter 3
Operation Using the ICIM
Overview
Introduction
The procedures in this chapter apply if you are using the Prisma II Intelligent
Communications Interface Module (ICIM) to configure and operate the Prisma II bdr
2:1 Redundant Transmit Processor.
Scope of This Chapter
Included in this chapter are descriptions of the ICIM front panel and the ICIM LCD,
and detailed procedures on how to use the software menus to configure the
transmitter.
In This Chapter
This chapter contains the following topics.
Topic
See Page
ICIM Introduction
3-2
3-3
The ICIM Password
3-6
Operating the ICIM
3-12
Monitoring Operating Status Using the ICIM
3-16
Configuring the Prisma II bdr Transmit Processor Using the ICIM
3-20
Checking bdr Transmit Processor Alarms Using the ICIM
3-23
Checking Manufacturing Data Using the ICIM
3-29
3-32
WARNING:
Avoid damage to your eyes! Do not look into any optical connector while the
system is active. Even if the unit is off, there may still be hazardous optical
levels present.