Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations Installation Guide
78-715192-01 Rev C
Operation Using the ICIM
3-21
Configuring the Prisma II bdr Transmit Processor Using the ICIM,
Continued
Configuring Parameters
Using the ICIM, you can configure the parameters listed above. To configure the
parameters, follow these steps. CONFIG parameters are listed after these
procedures.
1.
From the MAIN menu, press the
key to highlight the Shelf and Slot
fields.
2.
Press the
SEL
key to address the Shelf number. Then press the
key or
the
key to scroll to the number of the desired shelf.
3.
Press the
ENTER
key. The Slot field is highlighted.
4.
Press the
key or the
keys to scroll to the number of the desired
slot.
5.
Press the
ENTER
key. The initial information for the module of interest is now
displayed on the ICIM menu.
6.
To configure the module, press the
CFG
key.
7.
Press the
key or the
key to scroll through the configurable controls
until you find the parameter of interest.
8.
Press the
SEL
key to select the highlighted control.
9.
Press the
key or the
key to activate or change the value of the
selected control.
10. Press the
ENTER
key to save the changes and return to the MAIN menu.