Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations Installation Guide
4-14
Operation Using the LCI Software
78-715192-01 Rev C
Accessing the Device Details Window
Introduction
Information about a device (its parameters, alarms, and status) is located in the
Device Details window. The graphic below shows the Device Details window for a
Prisma II bdr Transmit Processor.
Within the LCI device tree, you can access this window using one of the following
four methods:
•
•
Double-click the chassis and select the device in the graphic that displays
•
Right-click the chassis and select Open from the menu that displays
•
Double-click the module
•
Right-click the device and select Details from the menu that displays
Note: Although you can use the method that’s most convenient for you, the
procedures throughout this chapter are described using the right-click device
technique.
For more information about the device tree, refer to LCI Device Tree Overview
For more information about the device tree, refer to LCI Device Tree Overview
earlier in this chapter.