Cisco Headend System Release 2.7 Installation Guide
Enable rdate on the DNCS
4036631 Rev B
53
Enable rdate on the DNCS
In this procedure, you will enable rdate on your system. By enabling rdate, remote
hosts can set their local time from the DNCS.
From a root xterm window, type the following command and then press Enter. The
system enables the time daemon on the DNCS.
hosts can set their local time from the DNCS.
From a root xterm window, type the following command and then press Enter. The
system enables the time daemon on the DNCS.
inetadm -e svc:/network/time:stream