Cisco Headend System Release 3.2 Installation Guide
Set Debug Flags
4036631 Rev B
75
Set Debug Flags
Follow this procedure to reset the debug flags through the user interface of the
DNCS.
1 From a dncs xterm window, type /export/home/dncs/.profile and press Enter.
DNCS.
1 From a dncs xterm window, type /export/home/dncs/.profile and press Enter.
The contents of the .profile file appear.
2 Locate the export EMCDEBUG entry that you remarked out in
Editing Debug
and Logging Settings in the .profile File (on page 51) and record it here:
____________________
Example: export EMCDEBUG=BbKkSDQLGOo
____________________
Example: export EMCDEBUG=BbKkSDQLGOo
3 Using the export EMCDEBUG value, record the logs in which you want to
enable the Debug log on the DNCS user interface UI.
Note: If you need assistance, contact Cisco Services.
Example: For the example in step 2, BbKkSDQLGOo, the following Debug logs
should be enabled:
Note: If you need assistance, contact Cisco Services.
Example: For the example in step 2, BbKkSDQLGOo, the following Debug logs
should be enabled:
bossServer
camAm
camAuditor
camEx
camFastrefrsh
camparamui-deprecate
camPsm
camTedChecker
siManager
MMMServer
saManager
4 On the DNCS Administrative Console, click the DNCS tab.
5 Click the Utilities tab.
5 Click the Utilities tab.