Cisco Headend Digital Broadband Delivery System Installation Guide
Verify that the DIS Flag is Enabled
740223 Rev F
5
5 Do you know the MAC address for the DHCT you want to check?
If yes, click the By MAC Address option, then click in the corresponding
field, and type the MAC address for the DHCT you want to check.
If no, click the By Serial Number option, then click in the corresponding
field, and type the serial number for the DHCT you want to check.
6 Click Continue. The Set Up DHCT window opens for the DHCT you want to
check.
7 Click the Secure Services tab.
8 Does a check mark appear in the DIS Enable field?
If yes, click the DIS Enable option to turn the DIS enable flag off, then click
Save.
If no, then the DIS Enable option is already off. Click Cancel to exit the
Secure Services tab.
9 Repeat steps 4 through 9 on the other two DHCTs in your test group to ensure
that the DIS Enable flag is turned off.
10 Contact your billing provider and ask them to enable the DIS flag on billing
transactions being sent to the DNCS. After billing enables the DIS flag on
transactions, repeat steps 3 through 9 on a test group DHCT to verify that billing
has enabled the DIS flag.