Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations Installation Guide
78-741939-01 Rev C
Installing the Enhanced Digital Reverse Modules in the Node
2-13
Installing the Enhanced Digital Reverse Modules,
Continued
4.
Route the optical fiber through the fiber access slot located between the tabs
in the fiber management tray.
Notes:
•
Notes:
•
Route the excess fiber loosely through the fiber hold-down clips.
•
This illustration shows the double-wide laser module only.
5.
Insert the optical fiber into the fiber bulkhead location marked Primary
Optical XMTR.
6.
To connect the laser module, refer to Connecting the Modules, Section B of
this chapter.