Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Avoid Electrostatic Discharge
4005697 Rev B
65
Avoid Electrostatic Discharge
CAUTION:
The electronic components of printed circuit boards and hard drives
are sensitive to static electricity. Do not touch the components or any
metal parts without taking proper antistatic precautions.
The electronic components of printed circuit boards and hard drives
are sensitive to static electricity. Do not touch the components or any
metal parts without taking proper antistatic precautions.
1 Leave the AC power cord connected to the server.
Note: AC power cords provide a discharge path for static electricity. They
should remain connected UNLESS you are performing one of the following
procedures:
should remain connected UNLESS you are performing one of the following
procedures:
Removing and installing the motherboard
Removing and installing the power distribution board (PDB)
Removing and installing the Advanced Lights Out Manager (ALOM) card
Removing and installing the front input/output (I/O) card
Removing and installing the front indicator board
Removing and installing the hard drive backplane
2 Place the new hard drive on an antistatic mat.
3 Attach the appropriate end of an antistatic wrist strap to the sheet metal on the
3 Attach the appropriate end of an antistatic wrist strap to the sheet metal on the
system chassis and attach the other end to your wrist.