Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Chapter 2 Replace a Disk Drive on a Sun Fire V445 Server
68
4005697 Rev B
Install the Hard Drive
1 Press the button to release the handle on the new hard drive.
2 Orient that hard drive so that the latch of the hard drive is on the bottom.
3 Insert the hard drive into the bay until it makes light contact with the backplane.
2 Orient that hard drive so that the latch of the hard drive is on the bottom.
3 Insert the hard drive into the bay until it makes light contact with the backplane.
Important: If you are replacing the hard drive that you removed in
Remove the
Hard Drive (on page 66), be certain that you are installing the new hard drive
into the bay from which the other hard drive was just removed.
into the bay from which the other hard drive was just removed.
4 Firmly press the center of the hard drive handle towards the hard drive until the
latch closes. This secures the hard drive in place.