Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Chapter 2 Getting Started
8
78-4042922-01 Rev B
Unpack the TED Server
To successfully install the TED server in your headend, you must unpack the TED
server from the carton and verify all parts and quantities. This section provides
instructions for unpacking the TED server from the carton.
server from the carton and verify all parts and quantities. This section provides
instructions for unpacking the TED server from the carton.
Unpacking the TED Server
Complete these steps to unpack the TED 4.0 server from the carton.
1 Open and remove all packing material from the carton.
2 Initial next to the following items to verify that your shipment includes the parts
1 Open and remove all packing material from the carton.
2 Initial next to the following items to verify that your shipment includes the parts
and quantities listed:
TED server (1) _____
Power Cords (2) _____
RJ-45 (Ethernet) cross-over cable (1) _____
Rack mounting brackets (2) _____
3 Are any parts missing?
If yes, see Customer Support of this guide for contact information.
If no, go to step 4.
4 Inspect all of the parts, including the TED server, for visible damages.
5
5
Are there any visible damages on any of the parts?
If yes, call Cisco Services for assistance and follow the menu options to
speak with a service engineer.
speak with a service engineer.
If no, go to step 6.
6 Read all the safety and operating instructions accompanied with this product.