Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Chapter 4 Initializing the TED Server
24
78-4042922-01 Rev B
Restart System Components
After completing the instructions in the previous sections, your next step is to restart
the system components. You must complete the procedures in this section to restart
the following system components in the order listed:
the system components. You must complete the procedures in this section to restart
the following system components in the order listed:
DNCS/ISDS processes
Application server processes (if necessary)
If using the RCS feature, restart RNCS processes at each remote site
Restarting the DNCS/ISDS
1 Open an xterm window on the DNCS/ISDS.
2 Log on to the DNCS/ISDS as the root user (or as yourself) and then type the
2 Log on to the DNCS/ISDS as the root user (or as yourself) and then type the
following command and press Enter to assume the dncs role.
su - dncs
3 From an xterm window on the DNCS/ISDS, type the following command and
press Enter. The Informix database, the SOAPServers, and DNCS/ISDS
processes start.
processes start.
dncsStart
4 Click the middle mouse button on the DNCS/ISDS and select Administrative
Console. The Administrative Console opens.
5 From the Administrative Console Status window, click Control for the
DNCS/ISDS.
Results:
Results:
The DNCS/ISDS Control window opens.
Green indicators begin to replace red indicators on the DNCS/ISDS Control
window.
window.
6
If any processes continue to display yellow or red after several minutes, try to
restart each individually by selecting Process > Start Process on the DNCS/ISDS
Control window.
restart each individually by selecting Process > Start Process on the DNCS/ISDS
Control window.
7 Do all processes display green indicators?
If yes, you are finished with this procedure.
If no, contact Cisco Services.
Restarting the Application Server
This section provides procedures for restarting the Application Server.
Note: Only follow this procedure if you have a Cisco Application Server. Otherwise,
follow your Application Server's instructions for this procedure.
Note: Only follow this procedure if you have a Cisco Application Server. Otherwise,
follow your Application Server's instructions for this procedure.
1 Press the middle mouse button on the DNCS/ISDS and select App Serv Start.