Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Appendix C
TED Server Failover Procedure
54
78-4042922-01 Rev B
Replacing a Primary TED Server with a Backup
TED Server
Stop System Components
Important: System components must be stopped before you power up the new TED.
Use the procedures in this section to stop system components in the proper order.
Failing to stop system components in the order described in this section may cause
you to encounter difficulties during the installation.
Use the procedures in this section to stop system components in the proper order.
Failing to stop system components in the order described in this section may cause
you to encounter difficulties during the installation.
Stopping the Application Server
Note: Only follow this procedure if you have a Cisco Application Server. Otherwise,
follow your Application Server's instructions for this procedure.
1 Press the middle mouse button on the DNCS/ISDS and select App Serv Stop.
2 From an xterm window on the DNCS/ISDS, type appControl and then press
follow your Application Server's instructions for this procedure.
1 Press the middle mouse button on the DNCS/ISDS and select App Serv Stop.
2 From an xterm window on the DNCS/ISDS, type appControl and then press
Enter. The Applications Control window appears.
3 Type 2 (for Startup/Shutdown Single Element Group), and then press Enter. The
system displays all Application Server processes.
Note: The system updates the display periodically, or you can press Enter to
force an update.
Note: The system updates the display periodically, or you can press Enter to
force an update.
4 When the Curr Stt (Current State) field of the Applications Control window
indicates that all of the Application Server processes have stopped, follow the
on-screen instructions to close the Applications Control window.
on-screen instructions to close the Applications Control window.
5 Type appKill and then press Enter. The appInitd process stops.
Stopping the RNCS Processes on the DNCS/ISDS
If the RNCS licensed feature is enabled on your DNCS/ISDS, refer to one of the
following to stop the RNCS processes, depending on your type of network:
following to stop the RNCS processes, depending on your type of network:
RNCS Installation and Upgrade Instructions for System Release 2.8/3.8/4.3 (part
number 4022447)
number 4022447)
RNCS Installation and Upgrade Guide (part number 4021167)
Stopping the DNCS
1 Press the middle mouse button on the DNCS/ISDS and select DNCS Stop. A
1 Press the middle mouse button on the DNCS/ISDS and select DNCS Stop. A
confirmation message appears.
2 Click Yes.
3 From an xterm window on the DNCS/ISDS, type the following command and
3 From an xterm window on the DNCS/ISDS, type the following command and
then press Enter. The Dncs Control utility window opens.
dncsControl