Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Process Overview
4031371 Rev E
7
Process Overview
This section describes the process for installing the TED server. The subsequent
chapters of this guide provide the specific instructions to accomplish each stage.
Process
The following table describes the process for installing the TED server. To
successfully install the TED server, you must complete each process listed in the
order given.
Stage Description
1
1
Unpack the TED server from the carton to verify the parts and the quantity.
Note: The instructions for unpacking the TED server are located in the next section
Note: The instructions for unpacking the TED server are located in the next section
of this chapter.
2
Install the server in an area with restricted access.
3
Connect the TED server to your DNCS/ISDS to provide communication between
the servers.
4
Verify the communications with the TED server from the DNCS/ISDS.
5
Stop the DNCS/ISDS processes.
6
Choose one of the following:
Initialize the TED server if the DNCS/ISDS has never been initialized with the
PowerKEY Conditional Access software.
Re-initialize the TED server if you are completing one of the following tasks:
–
–
Replacing an existing TED server
–
Initializing a DNCS/ISDS that has been previously initialized
–
Initializing a back-up TED server
7
Restart the DNCS/ISDS processes after completing all previous steps.
8
Store your portion of the CAA Pass Phrase in a secure location (preferably a safe).