Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Appendix B
Set Up Redundant TED Servers
46
4031371 Rev E
Reboot the TED Server
After you have restarted all the system components, you must reboot the TED
server.
Complete this procedure for the primary, secondary and warm spare ISDS.
Complete this procedure for the primary, secondary and warm spare ISDS.
Rebooting the TED Server
1 Log on to the DNCS/ISDS as root user
2 Open an xterm window on the DNCS/ISDS.
3 Type ssh dncsted -l root and press Enter. A password prompt appears on the
1 Log on to the DNCS/ISDS as root user
2 Open an xterm window on the DNCS/ISDS.
3 Type ssh dncsted -l root and press Enter. A password prompt appears on the
screen.
4 Type the TED root password and press Enter. A status display from the TED
server appears on the screen.
5 Type shutdown -g0 -y -i6 and press Enter. The connection is dropped and the
following message displays:
Read error from network: Connection reset by peer
Connection closed
Important: Wait at least 2 minutes for the TED server to reboot.