Cisco Model D-PCG1000 PowerKEY CAS Gateway Maintenance Manual
Run the Doctor Report
4019476 Rev B
3
Run the Doctor Report
Test the Connection to the DNCS (-q Option of the Doctor Report)
The Doctor Report includes the –q option. Through the –q option, system operators
can ping the QAM, MQAM, GQAM, and GoQAM modulators and test the remote
procedure call (RPC) connection between the modulators and the DNCS.
Furthermore, the –q option generates a report that lists all the modulators, specifies
whether the modulators are in a quarantined condition, and notes the date and time
stamp of the quarantine, if applicable.
can ping the QAM, MQAM, GQAM, and GoQAM modulators and test the remote
procedure call (RPC) connection between the modulators and the DNCS.
Furthermore, the –q option generates a report that lists all the modulators, specifies
whether the modulators are in a quarantined condition, and notes the date and time
stamp of the quarantine, if applicable.
Running the Doctor Report
Use the following procedure to run the Doctor Report on the DNCS.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dncs/Utilities/doctor and press Enter. The
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dncs/Utilities/doctor and press Enter. The
/dvs/dncs/Utilities/doctor directory becomes the working directory.
3 Type doctor and then press Enter. The system generates a list of parameters that
you can use to run the Doctor Report.
Note: Each parameter causes the Doctor Report to generate output with specific
configuration information.
Note: Each parameter causes the Doctor Report to generate output with specific
configuration information.