Cisco Model D-PCG1000 PowerKEY CAS Gateway Maintenance Manual

GQAM GbE Output Does Not Show a Link LED

4019476 Rev B

1 At the command prompt, type gigaautoneg and press Enter. This command

provides the current mode of the GBIC module.

2 Type gigaautoneg 2 and press Enter. This command changes the mode to 2, the

Query mode.

3 Type gigaautoneg and press Enter. This command verifies that the GQAM is

now operating in a correct mode, and the GBIC module connects to an input
device.

Note: For additional information, see one of the following operations alert bulletins:



Configuring the Auto Negotiate Setting on the GQAM (part number 4020084)



Provisioning the GQAM GBIC Interface Module (part number 4014669)



Ensuring Proper GQAM Operation and Provisioning of the GbE Port (part number
4017870)