Cisco Headend System Release 2.7 Installation Guide
Install the RNCS Software
4022447 Rev B
17
Install the RNCS Software
Notice to Installation Engineers
Be sure that you are using the procedures in this section to install the RNCS software
for the first time. If you are upgrading RNCS software at a site that already supports
the RCS feature, use the installation procedures in Chapter 2, instead.
for the first time. If you are upgrading RNCS software at a site that already supports
the RCS feature, use the installation procedures in Chapter 2, instead.
Installing the RNCS Software for the First Time
Now that you have established the correct environment for the RNCS server, you
can install the software. Complete the following steps to install the software.
can install the software. Complete the following steps to install the software.
Note: In the series of screens that follow, you will often have to select a configuration
parameter from a list of parameters. Use the arrow keys to navigate through your
choices, and make your selection by pressing the spacebar. The system usually
places an X beside the selected parameter.
1 If necessary, ask the on-site technician at the RNCS server to insert the DVD,
parameter from a list of parameters. Use the arrow keys to navigate through your
choices, and make your selection by pressing the spacebar. The system usually
places an X beside the selected parameter.
1 If necessary, ask the on-site technician at the RNCS server to insert the DVD,
labeled similarly to RNCS Install DVD, into the DVD drive of the RNCS server.
2 Type boot cdrom – install and press Enter.
Results:
The RNCS server reboots as the installation script begins.
The Select a Language window appears.