Cisco Headend System Release 2.7 Installation Guide

 

4022447 Rev B 

67 

 

After upgrading the RNCS software, complete the following steps to attach the 
server’s mirrors. 

Important:  Note these important points: 

 

You need to be root user to attach the server's mirrors. 

 

After attaching the server’s mirrors, you are committed to the upgrade. Be 
certain that the RNCS server is stable before committing to the upgrade. 

 

1  Type cd  /cdrom/cdrom0/s0/sai/scripts and press Enter. The 

/cdrom/cdrom0/s0/sai/scripts directory becomes the working directory. 

2  Type ./LIONN_attach_mirrors and press Enter. A confirmation message 

appears. 

3  Type y (for yes) and press Enter. The system runs a script that enables the disk-

mirroring function of the server. 

4  When the mirrors have been enabled, type exit and press Enter. The root user 

logs out of the server. 

 

Leave the RNCS software DVD in the DVD drive of the RNCS server. You need the 
DVD in place in case you ever have to re-install the software.