Cisco Headend System Release 2.7 User Guide
Run the syncwait Utility
4031374 Rev B
191
Running the syncwait Utility
Use the following instructions to monitor progress as mirrored disks synchronize
their data.
1 If necessary, open an xterm window on the DNCS.
2 Type syncwait.ksh and then press Enter. The system displays a message stating
their data.
1 If necessary, open an xterm window on the DNCS.
2 Type syncwait.ksh and then press Enter. The system displays a message stating
the percentage of the mirror-synchronization process that is complete.
Notes:
Notes:
The following example shows two mirrored disk sets: d503 and d506. The
submirrors associated with d503 are 2 percent synchronized. The submirrors
associated with d506 are 43 percent synchronized.
submirrors associated with d503 are 2 percent synchronized. The submirrors
associated with d506 are 43 percent synchronized.