Cisco Headend System Release 2.7 User Guide
The signonCount Utility Data Fields
4031374 Rev B
235
Columns
Descriptions
UN-Config Rcvd-This number of DHCTs are
requesting a UN-Config message from the
DNCS.
Note: The UN-Config message contains
information, like an IP address, that allows
DHCTs to sign on to the network.
requesting a UN-Config message from the
DNCS.
Note: The UN-Config message contains
information, like an IP address, that allows
DHCTs to sign on to the network.
UN-Config Sent-The DNCS has sent this
number of UN-Config messages to DHCTs,
allowing the DHCTs to sign on to the network.
Note: At this point, the DHCTs are physically in
two-way mode and have completed the sign-on
process.
number of UN-Config messages to DHCTs,
allowing the DHCTs to sign on to the network.
Note: At this point, the DHCTs are physically in
two-way mode and have completed the sign-on
process.
DAVIC Lost-This field indicates the number of
DHCTs that have lost the communication link
with the QPSK modulator.
DHCTs that have lost the communication link
with the QPSK modulator.
Note: The QPSK modulator then sends a
message to DHCTs that have lost the
communication link. The message requests
that the DHCTs recalibrate themselves with
the modulator so the entire sign-on process
can begin again.
message to DHCTs that have lost the
communication link. The message requests
that the DHCTs recalibrate themselves with
the modulator so the entire sign-on process
can begin again.
Threshold Exceeds Ver-The DNCS reports the
number of DHCTs that simultaneously attempt
to verify their configuration in excess of what the
system queues allow.
number of DHCTs that simultaneously attempt
to verify their configuration in excess of what the
system queues allow.
Threshold Exceeds UCfg-The DNCS reports the
number of DHCTs that simultaneously attempt
to sign on to the system in excess of what the
system queues allow.
number of DHCTs that simultaneously attempt
to sign on to the system in excess of what the
system queues allow.
Note: The numbers in the Threshold Exceeds Ver
and Threshold Exceeds UCfg columns should
theoretically be zero.
and Threshold Exceeds UCfg columns should
theoretically be zero.