Cisco Headend System Release 2.7 User Guide
4031374 Rev B
39
Introduction
The check_metadevices utility constantly monitors the state of the
metadevices on an Enterprise 450 or Sun Fire V440, V445, V880, and
V890 server, and then reports any errors it finds. The utility runs
automatically after you install the DBDS Utilities; system operators or
engineers do not have to invoke any specific commands to run the
check_metadevices utility.
metadevices on an Enterprise 450 or Sun Fire V440, V445, V880, and
V890 server, and then reports any errors it finds. The utility runs
automatically after you install the DBDS Utilities; system operators or
engineers do not have to invoke any specific commands to run the
check_metadevices utility.
Note: A metadevice is a group of physical devices accessed through a
virtual or logical device.
virtual or logical device.
3
Chapter 3
Monitor the Status of System
Metadevices with the
Metadevices with the
check_metadevices Utility
In This Chapter