Cisco Headend System Release 2.7 Installation Guide
Appendix A
Stopping System Components
Stopping System Components
28
Stop System Components
Follow these instructions to stop the system components.
1 If applicable, from an xterm window on the DBDS where you are logged in as
1 If applicable, from an xterm window on the DBDS where you are logged in as
dncs user, use the siteCmd command to access the RNCS (or LIONN) and
complete the following steps.
a Type the following command and press Enter. The RNCS processes stop.
complete the following steps.
a Type the following command and press Enter. The RNCS processes stop.
siteCmd [lionn hostname] lionnStop
b Type the following command and press Enter. The initd process on the
LIONN shut down.
siteCmd [lionn hostname] lionnKill
c Type the following command and press Enter to determine if the processes
have stopped. The processes are stopped when there are no processes listed
in the output.
in the output.
siteCmd [lionn hostname] pgrep -fl dvs
d From a root xterm window, type the following commands, pressing Enter
after each, to disable the RNCS cron jobs.
ssh –X dncs@[lionn hostname]
su -
svcadm –v disable –s cron
exit
2 From an xterm window on the DBDS where you are logged in as dncs user,
complete these instructions.
e Type the following command and press Enter. The DBDS processes stop.
e Type the following command and press Enter. The DBDS processes stop.
dncsStop
f Type the following command and press Enter. The initd process on the DBDS
is shut down.
dncsKill