Cisco Headend System Release 2.7 Installation Guide
Stop System Components
4026031 Rev B
13
3 Type 1 to select Startup/Shutdown All Element Groups and press Enter. The
system prompts you to select the target state of the element groups, similar to the
following example.
following example.
4 Type 1 to select Stopped, and press Enter. A confirmation prompt appears.
5 Type y to select yes, and press Enter. The main menu displays.
6 Type 2 and press Enter. The system displays the status of each process.
7 When all processes show a status of “stopped,” follow the on-screen instructions
5 Type y to select yes, and press Enter. The main menu displays.
6 Type 2 and press Enter. The system displays the status of each process.
7 When all processes show a status of “stopped,” follow the on-screen instructions
to exit the utility.
8 Have you stopped RNCS processes at all sites in your RCS?
If yes, type x and press Enter to exit the utility. Then go to Stopping Spectrum
NMS (on page 14).
NMS (on page 14).
If no, repeat steps 2 to 7 to stop the processes on another RNCS at another
site in your system.
site in your system.