Cisco Headend System Release 2.7 Installation Guide
Restart System Components
4026031 Rev B
27
Restart System Components
Introduction
After you reboot the DNCS and the SARA Server, you must complete the
procedures in this section to restart the following system components in the order
listed:
1 Restart Spectrum NMS.
2 Restart DNCS processes.
3 Restart SARA Server processes.
4 Complete required procedures for Aptiv and MDN servers, if necessary
5 Restart cron jobs, if necessary.
6 Restart the billing system and other third-party applications.
7 If using the RCS feature, restart RNCS processes at each remote site.
procedures in this section to restart the following system components in the order
listed:
1 Restart Spectrum NMS.
2 Restart DNCS processes.
3 Restart SARA Server processes.
4 Complete required procedures for Aptiv and MDN servers, if necessary
5 Restart cron jobs, if necessary.
6 Restart the billing system and other third-party applications.
7 If using the RCS feature, restart RNCS processes at each remote site.
Restarting Spectrum
Note: Skip this procedure if you are using DBDS Alarm Manager 1.0 instead of
Spectrum.
1 On the DNCS, click the middle mouse button and select Administrative
Spectrum.
1 On the DNCS, click the middle mouse button and select Administrative
Console.
2 On the DNCS Administrative Console Status window, click Control in the NMS
area. The Select Host Machine window opens with the Spectrum Control Panel
in the background.
in the background.
3 Click OK. The Select Host Machine window closes and the Spectrum Control
Panel moves to the forefront.