Cisco Headend System Release 2.7 Installation Guide
Verify SARA Server Versions
4023373 Rev B
27
Verify SARA Server Versions
Introduction
After you install the required software for your SARA Server, next ensure that the
correct software version was installed on the SARA Server as described in this
section.
correct software version was installed on the SARA Server as described in this
section.
To verify that the correct version was installed during the upgrade, use pkginfo, a
Solaris software management tool. The pkginfo tool displays details about a
software package, including the version number and status of the package.
Solaris software management tool. The pkginfo tool displays details about a
software package, including the version number and status of the package.
Important: If pkginfo indicates the status of the software is not completely installed,
contact Cisco Services for assistance.
contact Cisco Services for assistance.
Verifying SARA Server Software Versions
After you verify the DNCS software versions, complete these steps to verify the
software versions installed on the SARA Server during the upgrade.
1 On the SARA Server xterm window, type pkginfo -l SAIapsrv and press Enter.
software versions installed on the SARA Server during the upgrade.
1 On the SARA Server xterm window, type pkginfo -l SAIapsrv and press Enter.
The system displays details about the SARA Server software package (SAIapsrv),
similar to the following example. The software version number and status are
circled in this example.
Note: The "l" in " –l" is a lowercase "L."
similar to the following example. The software version number and status are
circled in this example.
Note: The "l" in " –l" is a lowercase "L."