Cisco Headend System Release 2.7 Installation Guide
Restart System Components
4023373 Rev B
31
Restart System Components
Introduction
After you verify the SARA Server versions, you must complete the procedures in
this section to restart the following system components in the order listed:
1 Restart Spectrum NMS.
2 Restart DNCS processes.
3 Restart SARA Server processes.
4 Complete required procedures for Aptiv and MDN servers, if necessary.
5 Restart cron jobs, if necessary.
6 Restart the billing system and other third-party applications.
7 If using the RCS feature, restart RNCS processes at each remote site.
this section to restart the following system components in the order listed:
1 Restart Spectrum NMS.
2 Restart DNCS processes.
3 Restart SARA Server processes.
4 Complete required procedures for Aptiv and MDN servers, if necessary.
5 Restart cron jobs, if necessary.
6 Restart the billing system and other third-party applications.
7 If using the RCS feature, restart RNCS processes at each remote site.
Restarting Spectrum
Note: Skip this procedure if you are using DBDS Alarm Manager 1.0 instead of
Spectrum.
1 On the DNCS, click the middle mouse button and select Administrative
Spectrum.
1 On the DNCS, click the middle mouse button and select Administrative
Console.
2 On the DNCS Administrative Console Status window, click Control in the NMS
area. The Select Host Machine window opens with the Spectrum Control Panel
in the background.
in the background.
3 Click OK. The Select Host Machine window closes and the Spectrum Control
Panel moves to the forefront.