Cisco Headend Digital Broadband Delivery System User Guide
7-2
Logo Options
4002178 Rev C
Position the IPG Logo on the Interactive Program Guide
Introduction
Each time your subscribers use the Interactive Program Guide, the IPG logo that you
have configured is displayed on the guide. The MSO Logo Position option lets you
choose to display the logo either to the left or right of the channel number. The
default position for the IPG logo is on the left side of the channel number. If you
want to keep the logo on the left, no additional steps are required. If you want to
move the logo to the right side of the channel number, see Positioning the Logo on
the Interactive Program Guide, later in this section.
Logo Positions
The following screens show an example of the logo positions.
Positioning the IPG Logo on the Interactive Program Guide
To position the IPG logo on the Interactive Program Guide, complete the following
steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the IPG tab.
Result: The IPG tab appears in the forefront.
Result: The IPG tab appears in the forefront.