Cisco Headend Digital Broadband Delivery System User Guide
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
4002178 Rev C
Channel Selection Options
3-11
Select the Channel That the Set-Top Tunes to at Power On,
Continued
7.
For the Power On Channel option, select one of the following settings for the
DCHT to tune to at power on:
•
•
Lowest Channel. The set-top tunes to the lowest channel in the channel
map. The channel displayed would automatically change if the channel
map is changed.
Note: Because the set-top lets the subscriber choose a channel number to
tune to at power on, the Lowest Channel option is not displayed on the
General Settings menu on the set-top. This option can still be selected as a
Staging Default.
•
Last Selected Channel. The set-top tunes to the last channel that was
viewed each time the set-top is powered on. This is the recommended
setting because it allows the subscriber to tune to the last channel that was
being viewed when the set-top was powered off.
•
Channel Number. The menu displays a list of channels from which the
subscriber can pick a channel that the set-top should tune each time the
set-top is powered on. This setting causes the set-top to tune to the
channel specified regardless of the hub’s channel map.
CAUTION:
The power on channel should never be set to a VOD or xOD channel or
to a channel that launches a third-party application. Tuning these
channels may initiate two-way communication over the network that can
lead to increased boot times and can delay the subscriber’s ability to
watch TV after a software download.
Note: A different channel can be used on each hub if the power on option is
selected as being configurable by hub. (See Build and Send a Configuration
to All Set-Tops in a Single Hub in Chapter 1 for more details.)
8.
Click Save.
Result: All of your subscribers’ set-tops will now tune to the power on
channel that you selected.
9.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
10.
Click File and Close to close the DHCT Configure prompt.