Cisco Headend System Release 2.7 User Guide
Chapter 3 Backup Procedures
20
4013779 Rev C
10 If you are using a custom tape drive configuration, type
/cdrom/cdrom0/s3/backup_restore/backupDatabase -v -b [blocksize] -s
[tapesize] and then press Enter.
Notes:
Notes:
The [blocksize] refers to the blocksize that corresponds to your tape from the
chart in Tape Considerations (on page 6).
The [tapesize] refers to the tapesize that corresponds to your tape from the
chart in Tape Considerations (on page 6).
Example:
/cdrom/cdrom0/s3/backup_restore/backupDatabase -v -b 128 -s 14000000
Result: The system displays the following message:
Result: The system displays the following message:
Please mount tape 1 on /dev/rmt/0h and then press Return to continue.
11 Press Enter. The system backs up your Informix database.
Notes:
The system prompts you to insert additional tapes if your backup requires
more than one tape.
A Successfully completed the database backup message appears when the
backup has completed successfully.
If the database backup was not successful, the system displays an error
message. Call Cisco Services at 1-800-283-2636 for assistance in resolving the
error message.
12 Type eject cdrom and then press Enter.
13 Remove the CD and tape(s) and store them in a safe place.
13 Remove the CD and tape(s) and store them in a safe place.