Cisco Headend System Release 2.7 User Guide
Restore the DNCS File System
4013779 Rev C
29
3 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
4 Insert the CD labeled DBDS Maintenance CD into the CD drive of the DNCS.
5 Type shutdown -y -g0 -i0 and then press Enter on both the DNCS and the
5 Type shutdown -y -g0 -i0 and then press Enter on both the DNCS and the
Application Server. The system halts all processes and an ok prompt appears.
6 At the ok prompt on the DNCS, type boot cdrom - SAshell and then press
Enter. The DNCS boots into the OpenWindows environment.
Notes:
Notes:
When the system boots into the OpenWindows environment, it searches its
non-volatile RAM for configuration information.
If the system is unable to locate its configuration information (a rare
occurrence), it prompts you for the information it needs through the Solaris
Installation menu.
7 In the process of booting, did the Solaris Installation menu appear?
If yes, go to step 8.
If no (the system successfully found the configuration information it needed),
go to step 9.
8 Complete the following steps on the Solaris Installation menu, as requested.
Note: The System Identification windows may not require you to configure all
of the following items. Configure only those items that the system presents.
a At the Solaris Installation menu, select Continue.
b At the Identify This System menu, select Continue.
c At the Hostname menu, type the hostname of the DNCS and then select
a At the Solaris Installation menu, select Continue.
b At the Identify This System menu, select Continue.
c At the Hostname menu, type the hostname of the DNCS and then select
Continue.
d At the IP Address menu, type the IP address of the DNCS and then select
Continue.
e At the NIS menu, select None and then click Continue.
f At the Subnets menu, select Yes at the System part of subnet question and
f At the Subnets menu, select Yes at the System part of subnet question and
then select Continue.
g At the Netmask menu, type the netmask of the DNCS and then select
Continue (or just select Continue to accept the default value of 255.255.255.0).
h At the IPv6 menu, choose No and then select Continue. The Confirm
Information window opens that allows you to review all of the configuration
information you have just submitted.