Cisco Headend System Release 2.7 User Guide
Chapter 4 Restoration Procedures
44
4013779 Rev C
9 Complete the following steps on the Solaris Installation menu.
a At the Solaris Installation menu, select Continue.
b At the Identify This System menu, select Continue.
c At the Hostname menu, type the hostname of the Application Server and
b At the Identify This System menu, select Continue.
c At the Hostname menu, type the hostname of the Application Server and
then select Continue.
d At the IP Address menu, type the IP address of the Application Server and
then select Continue.
e At the Subnets menu, select Yes at the System part of subnet question and
then select Continue.
f At the Netmask menu, type the netmask of the Application Server and then
select Continue (or just select Continue to accept the default value of
255.255.255.0).
g At the IPv6 menu, choose No and then select Continue. The Confirm
Information window opens that allows you to review all of the configuration
information you have just submitted.
h Review the data on the Confirm Information window and correct anything
that needs to be changed; then, select Continue.
i At the Name Service window, select None and then select Continue. The
Confirm Information window reappears.
j Review the data on the Confirm Information window and correct anything
that needs to be changed; then select Continue. An xterm window opens.
10 Choose one of the following options:
If you are using the tape drive of the Application Server to restore the file
system, insert your most recent file system backup tape into the tape drive of
the Application Server.
If you are using the tape drive of a remotely located computer to restore the
file system, insert your most recent file system backup tape into the tape
drive of the remotely located computer.
If you are restoring your file system from a backup directory that is located
on the NFS, go to Preparing to Restore the Application Server File System
from an NFS-Mounted Directory (on page 45).
11 Type cd /tmp/cdrom/backup_restore and then press Enter. The
/tmp/cdrom/backup_restore directory becomes the working directory.
12 Choose one of the following options:
If you are using the tape drive of the Application Server to restore the file
system, go to Restoring the Application Server File System (on page 45).
If you are using the tape drive of a remotely located computer to restore the
file system, go to Restoring the Application Server File System from a
Remote Host Computer (on page 46).