Cisco Headend System Release 2.7 User Guide
Chapter 2 Provisioning SDV Services on the DNCS
12
4024447 Rev C
Set Up the SDV Parameters on the DNCS
Overview
This section describes the parameters that are required to provision switched digital
services on the DNCS. These parameters are global parameters that are provisioned
for all switched digital service groups and active content.
services on the DNCS. These parameters are global parameters that are provisioned
for all switched digital service groups and active content.
Setting Up the SDV Parameters
Complete the following steps to provision the global parameters for the switched
digital service groups.
digital service groups.
Note: The SDV parameters shown in these procedures are the most basic
requirements that would typically be set up.
1 Click the DNCS tab and then click the System Provisioning tab.
2 From the System Management section, click Sys Config to open the DNCS
requirements that would typically be set up.
1 Click the DNCS tab and then click the System Provisioning tab.
2 From the System Management section, click Sys Config to open the DNCS
System Configuration window.