Cisco Headend System Release 2.7 User Guide
Chapter 2 Provisioning SDV Services on the DNCS
16
4024447 Rev C
3 Click File and select New to open the Set Up VASP window.
4 Select or enter the following values:
VASP Type: Select SDV Server.
ID: Enter a unique number that you will use to identify the SDV server (you
can use up to 10 numeric characters).
can use up to 10 numeric characters).
Name: Enter a unique name for the SDV server (for example, enter a name
that corresponds to the hub in which it provides services).
Note: We recommend that you enter the same name that you assigned
during setup of the SDV server.
that corresponds to the hub in which it provides services).
Note: We recommend that you enter the same name that you assigned
during setup of the SDV server.
IP Address: Enter the IP address for the SDV server that will be associated
with this VASP entry.
Note: The VASP IP address must match the IP address assigned to the SDV
server eth0 interface.
with this VASP entry.
Note: The VASP IP address must match the IP address assigned to the SDV
server eth0 interface.
Status: Select In Service to indicate that the VASP is in service and
operational.
operational.
5 Click Save. The system saves the VASP entry information in the DNCS database
and closes the Set Up VASP window. The VASP List window updates to include
the new VASP entry.
the new VASP entry.
6 Repeat steps 2–5 to create a VASP entry for each SDV server that you have set up
on your system.