Cisco Headend System Release 2.7 User Guide
Chapter 2 Provisioning SDV Services on the DNCS
34
4024447 Rev C
Enable SDV Functionality for All Explorer Set-Tops
and/or Tuning Adapters
and/or Tuning Adapters
Overview
This section describes how to enable SDV functionality for all Explorer set-tops
and/or tuning adapters that have been deployed in your system by creating an SDV
SAM service. Without a SAM SDV service, SDV functionality is disabled on these
devices.
and/or tuning adapters that have been deployed in your system by creating an SDV
SAM service. Without a SAM SDV service, SDV functionality is disabled on these
devices.
Important: If you want to enable SDV functionality for specific set-tops and tuning
adapters, skip this section and go to Enable SDV Functionality for Specific Explorer
Set-Tops and/or Tuning Adapters (on page 38).
adapters, skip this section and go to Enable SDV Functionality for Specific Explorer
Set-Tops and/or Tuning Adapters (on page 38).
Creating a SAM Service for Switched Digital Services
Creating an SDV SAM service provides SDV functionality for the set-tops and/or
tuning adapters that have been deployed in your system. Without an SDV SAM
service, SDV functionality is disabled on these devices. This procedure provides
instructions for the following methods:
tuning adapters that have been deployed in your system. Without an SDV SAM
service, SDV functionality is disabled on these devices. This procedure provides
instructions for the following methods:
Enable SDV functionality for all set-tops and tuning adapters
Enable SDV functionality for all tuning adapters
1 Click the Application Interface Modules tab, and then click SAM Service. The
SAM Service List window opens.
2 Click File and select New. The Set Up SAM Service window opens.