Cisco Headend System Release 2.7 User Guide
Chapter 2 Provisioning SDV Services on the DNCS
40
4024447 Rev C
5 Click Save to save this package in the DNCS database and close the Set Up
Package window. The package appears in the Package List window.
6 From the Package List window, select the package you created.
7 Click File and select Open. The Set Up Package window opens for the package
7 Click File and select Open. The Set Up Package window opens for the package
you selected.
8 Record the number shown in the EID field here: _________________________
Note: The number shown in the EID field is in hexadecimal format.
9 Click Cancel to close the Set Up Package window and return to the Package List
window.
10 Click File and select Close to close the Package List window and return to the
DNCS Administrative Console.
11 Refer to the hexadecimal conversion table in Appendix E of this document to
convert the EID from hexadecimal format to decimal format, and then write the
decimal format of the EID here: ____________________
decimal format of the EID here: ____________________
Creating a SAM Service for the SDV Package
Creating an SDV SAM service provides functionality for the SDV package that you
just created. Without an SDV SAM service, the package has no functionality.
Complete the following procedure to create a SAM service for SDV functionality.
This procedure provides instructions for the following methods:
just created. Without an SDV SAM service, the package has no functionality.
Complete the following procedure to create a SAM service for SDV functionality.
This procedure provides instructions for the following methods:
Enable SDV functionality for specific set-tops and tuning adapters
Enable SDV functionality for specific tuning adapters
1 Click the Application Interface Modules tab, and then click SAM Service. The
SAM Service List window opens.
2 Click File and select New. The Set Up SAM Service window opens.