Cisco Headend System Release 2.7 User Guide
Place the SDV Service on a Channel Map
4024447 Rev C
59
3 Scroll through the Available Services list and select the service you want to add
to the channel map.
4 Scroll through Channel Slot list until you see the channel slot to which you want
to assign the service, and then click the channel slot to select it.
5 Click Add. The service moves from the Available Services list to the Channel Slot
list you selected.
6 Click Save to save the channel map information in the DNCS database and close
the Set Up Display Channel Map window.
Note: By default, the system waits 20 minutes to build new channel maps.
However, the amount of time that elapses between a change to a channel map
and the time that a new channel map is built and broadcast to DHCTs varies
according to the SAM Update Timer setting. For this reason, allow an
appropriate amount of time to pass before testing the service to verify that
channels were added.
Note: By default, the system waits 20 minutes to build new channel maps.
However, the amount of time that elapses between a change to a channel map
and the time that a new channel map is built and broadcast to DHCTs varies
according to the SAM Update Timer setting. For this reason, allow an
appropriate amount of time to pass before testing the service to verify that
channels were added.
7 Do you want to add another service to a channel slot?
If yes, repeat steps 3–6.
If no, go to step 8.
8 On the Display Channel Map List window, click File and then select Close. The
Display Channel Map List window closes and the DNCS Administrative Console
returns to the forefront.
returns to the forefront.