Cisco Model D-PCG1000 PowerKEY CAS Gateway Release Notes
Verify the Current Software Version on the DNCS
4011763 Rev B
17
5 Type more gqamdata and press Enter. A result, similar to the following output,
appears.
6 Did more than one config file appear?
If yes, keep the xterm window open and go to step 7.
If no, go to Checking the Software Version Associated with the config File
(on page 18).
(on page 18).
7 Do you need to continue to run different versions of GQAM software on some
GQAMs in your network?
If yes, refer to Load Multiple Versions of GQAM Code (on page 37).
If no, go to step 8.
8 Update the GQAMs to use the same config file by performing the following
steps:
a From the DNCS Administrative Console, click Element Provisioning and
a From the DNCS Administrative Console, click Element Provisioning and
click QAM. The QAM List window opens.
b Select the GQAM, click File and select Open. The Set Up GQAM window
opens.
c Click Advanced Parameters and modify the configuration file, as needed.
9 Go to Checking the Software Version Associated with the config File
(on page 18).