Cisco Headend System Release 2.7 Installation Guide
Chapter 2 Preparing the DNCS for a SoftMux Common Download
8
4017307 Rev C
Verify That OCAP and Non-SA Source Definitions
are Licensed on Your System
Verifying That OCAP is Licensed on Your System
This section provides instructions to verify that your DNCS is licensed for the OCAP
service. If your DNCS is not already licensed for the OCAP service, you will be
required to stop and restart the DNCS before you can proceed with preparing the
DNCS for the SoftMux download process. Due to the system impact of stopping and
restarting the DNCS,we recommend that you perform the SoftMux Common
Download process during a maintenance window if your DNCS is not licensed for
OCAP service.
If your DNCS is licensed for the OCAP service, you may perform the SoftMux
If your DNCS is licensed for the OCAP service, you may perform the SoftMux
Common Download at any time.
1 Open an xterm window on the DNCS as dncs user.
2 Type cd /export/home/dncs/doctor and press Enter to access the doctor
1 Open an xterm window on the DNCS as dncs user.
2 Type cd /export/home/dncs/doctor and press Enter to access the doctor
directory.
Note: You may want to expand the xterm window to be able to see more of the
Note: You may want to expand the xterm window to be able to see more of the
report without having to scroll as much.
3 At the prompt, type doctor -av and press Enter to generate the doctor report.
When finished, the system displays the directory where the report is stored.
Example:
Example:
Output report file is /export/home/dncs/doctor/report.040227_1058.doc
4 Type more [doctor report file path] and press Enter to display the Doctor Report
one page at a time.
Example: more /export/home/dncs/doctor/report.040227_1058.doc
Example: more /export/home/dncs/doctor/report.040227_1058.doc
5 Press Enter to scroll through the report until you see the DNCS License Check
section as shown in the following example.
6 Is the Open Cable Applications Platform (OCAP) option licensed for your
DNCS?
If yes, go to step 7.
If no, stop your work in this document and contact the representative that
handles your account.